Supply and installation of approximately 20.5 metres of 1200mm high, aluminium, powdercoated flat top tubular fencing to  boundaries of  swimming pool area. Included would be (1) 1000mm opening flat top tubular single gates with self closing spring hinges & magna latch fitted. Posts are 50 x 50mm aluminium with four hole base plates, to be fixed to concrete pool surround with galvanised dyna bolts.

Colour will be White.

 PLEASE NOTE: No allowance has been made for the following:
* Any inductions
* Any subterranean services searching  
* Any core drilling (unless stated otherwise)
* Any demolish or removal from site of any existing fencing (unless stated otherwise)
* Any clearing of fence line of any objects, trees or shrubs
* Any leveling of fence line
* Any retaining wall construction
* Any sleepers
* Any raking of panels or gates

To supply & install 64.0m of 1800 high x 50mm aperture x 2.5mm gauge heavy galvanized chainwire fencing hung on straight posts, with 3 rows of 1.57mm high tensile barbed wire.

All posts are concreted into ground @ 3.0m centers. All posts, fittings & wire are in a galvanized finish.

• 1800 x 50 x 2.5 H/gal chainwire
• 50nb (60.3mm o/d) intermediate posts straight extra light gauge
• 32nb (42.4mm o/d) diagonal stays extra light gauge
• barbed wire,cable & tie wire 
• fittings to suit in galvanized finish

1.Dismantle & removal from site of 128.0m of existing chainwire and various types of fencing running down Hanna Street down to the water tank near the bottom entrance.

2.Supply & install 105.0m of 2100 high crimped spear top security fencing with posts , continuing on from the end of the existing section of fencing at the top end of Hanna St that will remain in place.  Posts are concreted into the ground. All posts & fittings are in a Satin Black powder coated finish.

3.Supply & install (1) pair of 2100 high crimped spear top double gates x 4.8m opening across the existing driveway entrance. Gates swung off 100mm x 100mm x 5.0mm gate posts. Gates, fittings & posts powder coated Satin Black.

4.Supply & install (3) x 2100 high crimped spear top single gates x 1.5 & 1.2m opening to replace the existing pedestrian entrance points at the ticket box on Hanna St. Gates swung off 100mm x 100mm x 5.0mm gate posts. Gates, fittings & posts powder coated Satin Black.

5.Cut off & re- paint existing posts & rails, then supply & install new 2100 high chainwire, cable wire & some new rails for the 13.5m section of fencing on top of the toilets behind the members box on Hanna St.

6.To remove and replace 8.0m of 1200 high loop top tubular steel fencing with posts to the right of the disabled parking spaces in Hanna St.

This quotation is for the supply and installation of aluminium, powdercoated horizontal slat fencing to property as requested. Scope of works are as follows:

Demolish & remove 5.13 metres of existing gates from dwelling to left hand side boundary. Supply & install approximately 5.13mm of 1800mm high horizontal slat gates from dwelling to left hand side boundary, included would be one 3.7 metre opening double gate & one 935mm opening single gate.  The double gate would be supported by a 150mm x 150mm post with a 100mm x 100mm post attached to dwelling to allow clearance for single gate to open out, as this is the only way it can operate correctly. The gate frames will be 50mm square, slats will be 65mm x 16mm with a gap of approximately 20mm between each slat. Gates will be fitted with a Lokk Latch Deluxe (lockable both sides).