Shop Drawings
WORK ORDER WORKSHOP REPORT - 5/Jul/2024 07:36 PM shane@vinesit.com.au
| W/O Number:WS04072024-2 | Job Number:22708 |
| Date Issued:5/Jul/2024 07:36 PM | Date Required: |
| W/O Raised By:Shane Cosgrove | Client:Test Company |
| Job Location: 113 Exhibition Street Melbourne VIC | 113 Exhibition Street Melbourne VIC |
| NOMINAL WIDTH | 6000 |
| NOMINAL HEIGHT | 1800 |
| CHAIN LINK | 50x3.15 KK Heavy Galvanized |
| SELECTED CHAIN LINK FABRIC HEIGHT | [22 LESS 0.5 DIAMOND] 1804 |
| ACTUAL FRAME HEIGHT | 1912 |
| *GATE FRAME GALVANIZED FINISH |
| Cut Crown Bar | DN32-XLG :: 1 X 4779 mm | |
| Bend Crown Bar |
|
|
| BOTTOM RAILS |
[VOGEL CUT]DN32-XLG: 1 X 2898 MM
|
|
| CENTRE RAILS | ||
| VERTICAL BRACES | [VOGEL CUT]DN25-XLG: 2 X 931 MM | |
| DRILL HOLE FOR SHOOT BOLT | 828 MM | |
| ITEM | PIPE | WORKSHOP CUTTING & BENDING (STAGE 1) | NUMBER OF UNITS | MINUTES PER UNIT | TOTAL MINUTES |
|---|---|---|---|---|---|
| DN32-XLG | CUT CROWN BAR RAILS | 1 | 1.5 | 1.5 | |
| DN32-XLG | BEND CROWN BAR | 2 | 5 | 10 | |
| DN32-XLG | CUT BOTTOM RAILS | 1 | 1.5 | 1.5 | |
| CUT CENTRE RAILS | 0 | 0 | 0 | ||
| DN32-XLG | CUT VERTICAL BRACING | 2 | 1.25 | 2.5 | |
| VOGEL NOTCH BOTH ENDS OF BRACING RAILS | 3 | 1 | 3 | ||
| DRILLING SHOOT BOLT HOLE | 1 | 2 | 2 | ||
| TOTAL CUT & PREP TIME FOR GATE FRAME | 20.5 | ||||
| ITEM | PIPE | WORKSHOP WELDING GATE FRAMES (STAGE 2.A) | NUMBER OF UNITS | MINUTES PER UNIT | TOTAL MINUTES |
|---|---|---|---|---|---|
| SETUP TIME ON WELDING BENCH (TACKING FRAME) | 6 | 1 | 6 | ||
| DN32-XLG | WELD OUTER FRAME | 2 | 5.5 | 11 | |
| WELD INTERNAL RAIL | 0 | 0 | 0 | ||
| DN32-XLG | WELD VERTICAL BRACING | 4 | 4.5 | 18 | |
| TOTAL WELDING TIME FOR GATE FRAME ONLY | 35 | ||||
| ITEM | CODE | IMAGE | WORKSHOP GATE FITTINGS (STAGE 2.B) | NUMBER OF UNITS | MINUTES PER UNIT | TOTAL MINUTES |
|---|---|---|---|---|---|---|
| H8032D | TWO PART INTERLOCKING HINGES + ATTACHMENT - GALVANISED | 2 | 1 | 2 | ||
| GEB12-SL | "SINGLE (""L"" SHAPE) HAND HOLE (FOR TOP OF MID RAIL) ( 12MM ROD - 90MM X 186MM) FOR STANDARD SINGLE GATE SHOOT BOLT- GALVANISED" | 1 | 1 | 1 | ||
| GDB370 | SHORT DROP BOLTS - GALVANISED | 1 | 1 | 1 | ||
| B8 | SHOOT BOLT (WITH SLIDE PLATE) - GALVANISED | 1 | 2 | 2 | ||
| HCR | HINGE COLLAR | 1 | 3 | 3 | ||
| TOTAL WELDING TIME FOR SELECTED WELD ON GATE FITTINGS ONLY | 9 | |||||
| ITEM | WIRE UP GATE FRAMES (STAGE 3) | NUMBER OF UNITS | MINUTES PER UNIT | TOTAL MINUTES |
|---|---|---|---|---|
| STEP 1 | DE-SCALE WELDS & PRIME PAINT ALL WELDS | 6 | 1 | 6 |
| STEP 2 | FIT CHAIN LINK TO GATE FRAME BASED ON M2 | 3SQM | 2 | 6 |
| STEP 3 | TRIM & KNUCKLE CHAIN LINK TO BOTTOM RAIL M | 2.9 | 2.5 | 7.25 |
| STEP 4 | SHAPE IN HAND HOLES | 1 | 1 | 1 |
| STEP 5 | LOAD UP GALV LACING WIRE TO NEEDLE KG | 0.47 KG | 4 | 1.88 |
| STEP 6 | LACE UP PERIMETER OF GATE FRAMES | 8M | 5 | 40 |
| TOTAL LACING TIME FOR GATE FRAME ONLY | 62.13 MIN | |||
| SETUP TIME ALLOWANCE BETWEEN STAGES 1 TO 3 | 18 |
| TOTAL O/ALL MINUTES ALLOWED FOR MANUFACTURER OF GATE (BASED ON CURRENT STANDARDS) | 144.63 |